|
Iso Bloco One All-purpose tape for airtight, watertight and insulating window fixing
This is for a 30m roll of IsoBloco One 2-12mm deep, 54mm wide tape for air and water tight window and door fixing.
Discounts are available for orders of boxes of tapes (please call 02920373094 for details)
Other sizes of tapes will be available in the future.
ISO-BLOCO One is a multi-talent tape in sealing joints. It combines all the demands of the EnEV- (energy saving regulations) and RAL-installation guidelines in one sealing product. Hard to believe but true. Where three products were necessary, now one is sufficient, because ISO-BLOCO One has ingenious product features.
The "all in one tape" operates on the 3-layer principle. The external area provides a superior driving rain resistance; the middle range provides thermal and acoustic insulation and the internal area absolute air-tightness, thus saving lots of time. In only one step the tape is stuck to the window frame and done! An easier, more reliable, time-saving professional window sealant is hard to imagine.
An energy saving tape
ISO-BLOCO One makes it possible to save even more energy in the future. The future orientated window connecting tape is equipped witha special foil for the sealing on the inner flank. This special foil has an a-value of zero, meaning 100 percent air-tightness on the internal joint sealing range. Thus making ISO-BLOCO One an unprecedented absolute sealing tape and even suitable for the higher sealing requirements on passive houses. Uncontrolled heat loss and drafts
through connection joints are prevented by the hermetic separation of internal and external climates. This is a winning aspect for “Buildings Energy Pass”, good results with the Blower Door / Air Pressure Test and has a positive effect on heating costs.
Energy saving potential
ISO-BLOCO One contributes significantly to reducing building convection heat loss. With an a-value of zero an almost 100 percent airtight inner seal can be achieved. Resulting in far less escaped air through the building joints compared with conventional joint sealing tapes which could have an a-value of 0.1. Lower heating requirements are the obvious results, clearly reflecting on the heating costs.
A health beneficial tape
If moisture penetration or joint condensation does not escape to the outside, moisture damage and mildew infestations occur. Forewarned is forearmed! ISO-BLOCO One has an optimal vapour diffusion, (sd-value,) gradient, within the joint sealing area, corresponding to that of the RAL-Quality windows and doors recommended sealing principle "inside tighter
than outside". The sd-value gradient of a window sealing joint should be at least 10: 1 from the inside to the outside. ISO-BLOCO One optimises the drying effect of the joints with an impressive vapour diffusion gradient of 50: 1, providing a reliable moisture transmission to the outside.
A tape for stormy weathers
In times of climate changes we must adjust to the new challenges in building sealing. In the future we will be confronted with more frequent and stronger storms, accompanied with violent rain. New solutions are required in the sealing technology; above all the window and door areas in buildings need to be better protected against driving rain in the future.
According to the wind zone maps, of the middle European weather offices, wind velocities of more than 140 km/h will be reached more frequently. This corresponds to a pressure of approx. 900 Pa. ISO-BLOCO One has over 1.000 Pa resistance to driving rain, while still providing a 500% Movement Accommodation Factor, standing up to the strongest rainfall and storm gusts. With this extraordinary efficiency ISO-BLOCO One exceeds conventional window connection tapes to around more than 50% sealing protection performance against driving rain ISO-BLOCO One possesses an extremely high expansion capability – 500% MAF. This is important to compensate for building movement and joint irregularities.
|
